← Back to blog
GPT-6 Astra vs Fable 5: Which Model Should You Choose?

GPT-6 Astra vs Fable 5: Which Model Should You Choose?

Alex Morgan

By Alex Morgan

MyClaw Editorial

Compare in MyClaw

Compare GPT-6 Astra and Claude Fable 5 on your own work

Run the same hard job in both models to compare quality, recovery, speed, and cost before choosing a stack. Neither is an automatic default.

AI Takeaway

  • Which model should you test first? Astra is a strong candidate for demanding agent workflows based on published evaluations. Test both on your own coding or research tasks before switching.
  • Which is cheaper? Standard API rates match at $10 input and $50 output per million tokens. Fable 5 has a pricing advantage for long prompts: its full context window uses standard rates, while Astra adds a premium above 272,000 input tokens.
  • Does this comparison cover Fable 5.1? No. It compares GPT-6 Astra with Claude Fable 5; Fable 5.1 is a separate version.
  • Can you use either with MyClaw? MyClaw hosts OpenClaw agents. Confirm that your configured provider supports the exact model before running a comparison.

GPT-6 Astra vs Fable 5 at a Glance

GPT-6 Astra and Claude Fable 5 both target complex reasoning, coding, and long-running agent work. The useful differences emerge in specific tasks: Astra leads several published agent evaluations, while Fable 5 remains competitive on coding and some reasoning measures.

The comparison here uses claude-fable-5, rather than claude-fable-5-1. If you are evaluating the successor, use the separate GPT-6 Astra vs Fable 5.1 comparison.

DetailGPT-6 AstraClaude Fable 5
API model IDgpt-6-astraclaude-fable-5
Context window1,050,000 tokens1 million tokens
Maximum output128,000 tokens128,000 tokens
Cached input, per million tokens$1 at standard rates$1
Standard input, per million tokens$10$10
Standard output, per million tokens$50$50
Useful starting pointComplex OpenAI agent workflowsDemanding work in an established Claude workflow

These specifications reflect official documentation checked on September 9, 2026. A large context window describes capacity; it does not guarantee that every detail will be used correctly.

How Do They Compare on Coding, Reasoning, and Agent Tasks?

OpenAI’s September 2026 launch comparison reports these results for Astra and the original Fable 5. The table spans coding, science, and agent tasks:

EvaluationGPT-6 AstraFable 5
Terminal-Bench 4.057.9%44.5%
FrontierCode 1.1 Main, score53.353.5
Terminal-Bench Science 0.164.6%21.4%
Humanity’s Last Exam, with tools57.2%63.8%
Agents’ Last Exam59.3%48.7%

OpenAI reports maximum scores across effort settings, and evaluation environments can differ from production. These figures are vendor-published results, rather than an equal-budget MyClaw comparison.

Coding and Debugging

Astra’s Terminal-Bench lead suggests a stronger starting point for difficult terminal-based development work. FrontierCode is effectively tied, so the evidence does not support declaring a universal coding winner.

For an existing project, the decisive result is a correct fix that passes relevant tests and preserves intended behavior. Review whether the model found the underlying problem, introduced unnecessary changes, or left work for you to finish. Fable 5 remains a useful baseline when it already handles your repository reliably.

GPT-6 Astra Is Here: What You Need to Know About ChatGPT's New Model | PCMag

Research and Complex Reasoning

The science result favors Astra, while Humanity’s Last Exam with tools favors Fable 5. Different tasks can produce different rankings.

For research, give both models the same question and sources. Ask them to reconcile conflicting reports and identify unresolved claims, then check the cited passages and calculations. This makes evidence handling visible and gives you a concrete basis for choosing between their outputs.

Neither result establishes a winner for everyday writing. Evaluate accuracy and coverage separately from tone, structure, and how much editing the draft needs.

Browser Tasks and Long-Running Agents

Astra’s Agents’ Last Exam result makes it worth testing for work that crosses several tools. The GPT-6 Astra review covers its broader capabilities and operating requirements.

For a browser workflow, judge the final state: were the correct records updated, and was the requested artifact produced? Also record interruptions, recovery attempts, and human intervention. These reveal whether a promising demonstration can become a dependable routine.

GPT-6 Astra vs Fable 5 Pricing: What Does a Finished Task Cost?

Claude Fable 5 and Claude Mythos 5 \ Anthropic

Token Prices, Caching, and Long Context

Both models charge $1.50 for an illustrative request containing 100,000 uncached input tokens and 10,000 total billable output tokens at standard API rates. Reasoning consumption, tool charges, and provider adjustments can change a real invoice.

Long prompts create a clearer difference. Astra charges twice its input and cache rates and 1.5 times its output rate once input exceeds 272,000 tokens, applying those rates to the whole request. Anthropic includes Fable 5’s full 1M context window at standard rates.

For example, 300,000 uncached input tokens plus 10,000 billable output tokens would cost $6.75 on Astra versus $3.50 on Fable 5 under those rules. This compares equal token counts, not equal task performance or identical tokenization.

Both list standard cache reads at $1 per million tokens. Fable 5 charges $12.50 for five-minute cache writes and $20 for one-hour writes; Astra lists cache writes at $12.50. Cache duration and hit frequency therefore belong in your estimate. These are first-party API rates; check your provider’s terms and keep chat subscription allowances separate.

Retries, Review Time, and Hosting

A useful comparison divides total model spending, including retries, by the number of accepted tasks. Track review and repair time alongside that figure. If one result needs extensive manual correction, its lower token bill may offer little practical value.

Suppose ten attempted jobs cost $20 in model usage, and eight pass review. The model cost per accepted job is $2.50. If only four pass, it becomes $5, even though total spending is unchanged. Failed runs belong in the total even when you discard their outputs.

For ongoing agent work, budget for the runtime as well. MyClaw hosting plans separate the subscription from AI token usage, with any included credits accounted for separately. Allocate shared hosting costs consistently when comparing the two models.

Compare in MyClaw
Compare GPT-6 Astra and Claude Fable 5 on your own work

Run the same hard job in both models to compare quality, recovery, speed, and cost before choosing a stack. Neither is an automatic default.

Which Model Fits Your Workflow?

Choose a starting point from the work you already do:

Your workflowTest firstWhat to check
OpenAI agent using multiple toolsAstraTask completion and tool compatibility
Existing Claude coding workflowFable 5 as your baselineWhether Astra improves accepted results enough to justify switching
Large document collectionsFable 5 for the cost baselineAnswer quality and actual token consumption
Research with difficult evidenceBothSupported conclusions and reproducible calculations
Repeated automationBoth on representative casesFailure frequency, recovery, and cost per accepted run

Astra is the stronger candidate to try when tool execution is your bottleneck. Fable 5 deserves consideration when long inputs drive spending or an existing Claude workflow already produces dependable results.

Deployment conditions also matter. Astra’s launch announcement described a phased rollout, so verify access in your actual account. Anthropic’s documentation lists 30-day data retention for Fable 5 and excludes zero data retention unless expressly authorized. Review Fable 5’s deployment requirements before using it with data subject to retention limits.

Check tool compatibility and interruption handling before switching. Fable 5 can return a refusal that your application must recognize; any retry on another model should be recorded as a substitution. Integration work and fallback behavior affect both reliability and cost.

How to Test Your Model Choice with MyClaw

Model choice becomes more useful when the agent can keep working on recurring reports, repository tasks, or scheduled checks. MyClaw provides managed OpenClaw hosting in a private, always-on environment, handling the server setup and maintenance. Use that workspace to evaluate the models your provider makes available.

Step 1: Set Up Your OpenClaw Workspace

Deploy your instance and connect the files and tools the job requires. Verify that the exact model IDs are callable. Choose a bounded task, such as producing a report from a fixed dataset or fixing a reproducible bug, and define what a passing result must contain.

Get Started

Step 2: Compare the Same Task on Available Models

Use separate sessions with identical starting files, instructions, permissions, and spending limits. Keep the first run’s output and saved memory out of the second run. Record model IDs, effort settings, elapsed time, token charges, and corrections. Matching effort labels across providers does not guarantee equivalent computation. If one model is unavailable, defer that comparison.

Step 3: Put the Better Fit to Work

Review the outputs against your original acceptance criteria. Repeat important tasks across several representative cases before choosing a default. Then use the selected model for the ongoing workflow, keeping enough logs to investigate failures. Revisit the choice when your workload or available models change.

Conclusion: Start with Your Biggest Bottleneck

If unfinished tool workflows are slowing you down, start your next trial with Astra. If large inputs dominate the bill, use Fable 5 as the cost baseline. Choose a representative job, set an acceptance threshold, and compare the work each model actually finishes. Change your default when the improvement justifies the cost and setup effort.

Compare in MyClaw

Compare GPT-6 Astra and Claude Fable 5 on your own work

Run the same hard job in both models to compare quality, recovery, speed, and cost before choosing a stack. Neither is an automatic default.

GPT-6 Astra vs Fable 5: Which Model Should You Choose? | MyClaw.ai